Deep cuts, scratches and pet stains all make wood floor less shiny and unsightly. In such a situation, an efficient refinish can greatly save your hardwood floor. However, you do not necessarily need to be a specialist in the field to perform the task although some structure and organization is necessary to get you started. There are plenty of methods currently available for doing hardwood floor refinishing; so, it is best that you choose one that is most suitable. Below are some important considerations you need to make whether you are doing the refinishing job the modern way or in a more traditional way. Remember to list down all the items you will be renting or buying. Before making this decision, it is imperative that you choose the most appropriate method of refinishing first.
Some pre-work is necessary to get you started so that the task is made easier. For instance, all furniture items should ideally be taken out and covered with plastic. The same applies to all air grills. So, you need to locate all air grills and cover them using plastic as this prevents dust from entering the ducts. Removing doors that open in the rooms where you will be working is yet another useful tip that should be considered prior to commencing the refinishing job. It makes the job flow smoothly without hindrances. Removing doors also makes work a lot simpler particularly if you choose the more traditional refinishing method that requires a drum sander.
Check and make sure there are no nails present particularly in the area that will be sanded. Also, make sure the drum sander has no nails as these can lead to disastrous results and you might end up spending more money for repairs. Just like you would spend time preparing the rooms that will be worked on, it is also a good idea to prepare the machines you intend to use especially if you want them to operate more efficiently and smoothly. Professionals in the industry recommend use of an edger and a drum sander capable of sanding baseboards as these produce better results. In case you have chosen to rent the machinery as opposed to buying, you should apply ingenuity in order to make a difference. Homeowners planning on undertaking the tasks on their own are often advised to rent machines from shops that specialize in matters relating to flooring. Doing so allows you to get tips and free expert advice from the professionals who are highly knowledgeable as far as technical details of the machinery are concerned. Normally, information about the flooring equipment is offered at no cost for as long as you are renting them.
Resource: Hardwood floor installation charlotte NC